Stainless Steel Cladding

Stainless steel cladding is required behind the cooking suite and walls experiencing extreme heat.
Some restaurant chains like Wagamama’s have Stainless Steel wall cladding throughout the kitchen and front of house. We have also clad front counters and bars in Stainless Steel.

Stainless Steel cladding in Commercial kitchens

Stainless Steel Cladding is easy cleaned and can give the very modern, hygienic look.

Is also robust being used for wall bumpers and pillars where a high density of trolleys and traffic may pass.

Purchased in various thickness or sizes we can cut and fit for the individual needs.


All works to be carried out by trained installers.

Fit Stainless Steel cladding with approved adhesive as manufacturers instructions.
Stainless Steel cladding to be adhered with a required adhesive to depend on surface.
Stainless steel panels to be joined with a Stainless Steel "H" trim in stainless steel.
All stainless steel work to be carried out with 2 operatives at all times.
All operatives to wear full PPE .

stainless steel mouldings


Unit D3, Rudford Industrial Estate
Nr Arundel
West Sussex
Tel: 01903 722522
Fax: 01903 722220

UK Map - Nationwide Hygienic Cladding Installer





Stainless steel is known for its ability to be a clean surface that resists corrosion and rust.
Dirt, dust and grime, however, put stainless steel at risk for corrosion and rust. Luckily, stainless steel responds well to cleaning, never wearing out from excessive cleaning, as long as certain rules are followed.

1. Water and a cloth.
Routine cleaning can be accomplished by using warm water and a cloth. This is the least risky option for cleaning stainless steel. Dry with a towel or cloth to prevent water spots. Wipe in the directions of the polish lines.

2. Mild detergent, (dish washing liquid) and cloth.
For cleaning that needs more power, mild detergent and warm water can do a great job without damaging the stainless steel. Make sure you rinse the surface thoroughly to prevent staining and spotting. Towel dry to prevent water spots which can be caused by minerals in water.

3. Glass cleaner for fingerprints.
Fingerprints are one of the biggest complaints about stainless steel, but can be taken care by using glass cleaner or household ammonia. Rinse thoroughly and towel dry. There are some newer types of finishes for stainless steel that resist fingerprints, a must if your pint-sized helpers leave their mark on your stainless steel appliances.

4. Stainless Steel Cleaner.
If you've had staining or scratching, or need to polish your stainless steel, a stainless steel cleaner may be a good option. Some of these cleaners and polishes can help minimize scratching and remove stains. They also can polish stainless steel surfaces nicely. Read the directions on the stainless steel cleaner and test in an inconspicuous spot. Be sure to rinse thoroughly and towel dry.